x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
This config bundle provides ready-to-use profiles for the ProForge 5 in PrusaSlicer, including printer settings, filament profiles, and start G-code optimised for the ProForge 5 toolchanger.
Included profiles:
Printer: ProForge 5
Print: ProForge Default
Filaments: PLA, ABS
Note: PrusaSlicer 2.9.4 or later is required.
Open PrusaSlicer
Go to File → Import → Import Config Bundle...
Navigate to and select P5_PrusaSlicer_config_bundle.ini
Click Open — the profiles will be imported automatically
After importing, select the ProForge 5 profiles from the right-hand panel:
Set Printer to ProForge 5
Set Print settings to ProForge Default
Set Filament to your desired material (PLA or ABS)
Go to Printer Settings → General and confirm the Host field shows the correct address for your ProForge 5 (default: proforge5.local)
If you have updated your printer's hostname, update this field accordingly